| Engine Type: | Zongshen 300cc water cooled |
| Max Power: | 12.5/6500 kw(r/min) |
| Gear System: | Manual Clutch; R-N-1-2-3-4-5 |
| Final Drive: | Shaft, 4 Wheel Drive |
| Carburetor: | PZ30 |
| Starting: | Electric |
| Suspension / Front: | Oil Damper |
| Suspension / Rear: | Oil Damper |
| Brakes / Front: | Hydraulic Disc |
| Brakes / Rear: | Hydraulic Disc |
| Tire & Rim / Front: | 23×7-10′, Alloy |
| Tire & Rim / Rear: | 22×10-10, Alloy |
| L x W x H (mm): | 1700×1150×1120 mm |
| Seat Height: | 790 mm |
| Wheelbase: | 1240 mm |
| Ground Clearance: | 170 mm |
| Fuel Tank: | 5 L |
| Max Loading: | 150 kgs |
Partnering with an established 300cc 4×4 farm atv manufacturer provides international volume distributors, commercial agricultural buying groups, and industrial powersports dealers with a highly recognizable, high-turnover fleet asset. The Volkan HAMMER 300 takes the legendary, time-tested “Classic Bull” utility aesthetic and retrofits it with a relentless powertrain configuration. Driven by an ultra-durable Zongshen 300cc water-cooled engine, this mechanical workhorse rejects fragile automatic belt setups in favor of a heavy-duty 5-speed manual clutch transmission (R-N-1-2-3-4-5) paired with a permanent, continuous full-time 4WD shaft drive matrix, ensuring steady 150 kgs max loading output across extreme off-road terrain.
Sourcing directly from a verified 300cc 4×4 farm atv manufacturer ensures strict raw material trace controls and perfect parts interchangeability. The HAMMER 300 combines a compact, high-stability 1240 mm wheelbase with a protective 790 mm seat height to maximize rider leverage when transporting equipment or navigating steep field ditches. Review the factory manufacturing configurations below:
| Technical Specifications | Volkan HAMMER 300 Factory Standards |
|---|---|
| Engine Configuration | Genuine Zongshen 300cc, Single-Cylinder, Liquid Water-Cooled Heavy Industrial Engine |
| Maximum Power Output | 12.5 kW / 6500 r/min — Flat Torque Plateau Optimizing Rigid Low-End Drawbar Pull |
| Transmission & Gear System | Heavy-Duty Manual Clutch; Professional 5-Speed Mechanical Sequential Gears (R-N-1-2-3-4-5) |
| Drive System Architecture | Sealed Heavy-Duty Shaft Transmission; Continuous Full-Time 4WD (No 2WD Mode) |
| Fuel System & Induction | Premium PZ30 Jet Carburetor Tuning Calibration | Fuel Reservoir: 5L |
| Chassis Load Profile | 1700 × 1150 × 1120 mm | Ground Clearance: 170 mm | Max Loading Capacity: 150 kgs |
| Wheel & Rim Assembly | Front: 23×7-10″ Premium Alloy | Rear: 22×10-10″ Premium Alloy (Heavy Off-Road Tread) |
Sourcing your commercial inventory from a direct 300cc 4×4 farm atv manufacturer like Volkan Moto prevents dealership exposure to modern fragile body designs that fail under daily farm labor. The HAMMER 300 features the iconic Bull-Style structural front brush guard and deep-skirt muddy water deflectors, offering maximum impact protection against thick orchard branches and loose livestock fencing. Driven by the Zongshen water-cooled core, power is distributed constantly to all four premium alloy rims through a permanent full-time 4WD shaft configuration. This eliminates any drive-engagement latency or belt slipping during deep mud launches with a full 150 kgs load capacity.
The under-chassis geometry of the HAMMER 300 relies on an independent front and rear suspension matrix managed by heavy-duty oil-dampened struts. This delivers precise four-wheel surface alignment across uneven ranch topsoils and heavily rutted timber pathways. Positioned at an extremely competitive factory direct wholesale pricing tier to maximize international buyer margins, this full-time 4×4 asset is open for private white-label customization. Large volume buying groups can configure full container orders with various factory-installed utility configurations, including:
🛠️ B2B WHOLESALE ADVANTAGE
“Sourcing from an authentic 300cc 4×4 farm atv manufacturer integrates an evergreen, universally trusted styling archetype into your commercial inventory. The HAMMER 300 balances rugged Zongshen manual clutch mechanics with permanent four-wheel-drive traction to ensure high showroom velocity and long-term farm operator satisfaction.”
As a premier manufacturing group, Volkan Moto delivers complete white-label and flexible OEM production options for bulk container orders. Importers can customize rugged injection-molded fairing colors, localized commercial brand decals, and specialized cargo configurations to match unique agricultural and utility market demographics.
Our heavy-duty independent suspension layouts are engineered to withstand prolonged trail fatigue, significantly lowering after-sales maintenance and warranty claims for overseas distribution groups.
The Volkan HAMMER 300 is the definitive tactical choice for powersports business entities looking to dominate the mid-size utility and agricultural sector. It fuses high-capacity mechanical engineering with optimized factory wholesale cost control. Claim your regional supply pipeline now.
Contact our factory export specialists today to receive a complete container wholesale quotation, customized loading packaging diagrams, or to lock down exclusive importer rights for your territory. Or you can browse our full ATV lineup and professional 4×4 ATV category to view more models.
As a trusted Chinese ATV and Dirt Bike factory, Volkan Moto brings a full suite of strategic advantages that simplify your procurement process and amplify your brand strength.
Direct supply from our factory ensures competitive and stable pricing.
Start small and grow steadily — ideal for testing markets or launching new SKUs without heavy inventory pressure.
Dedicated support team and spare parts availability ensure smooth long-term operation.
We’ll respond to your inquiry within 24 hours.